ABONG MINI TREBUCHET Assembly Instructions Manual
  |
STEP BY STEP BUILDVIDEO AVAILABLE ATABONG.COMManufactured By:ABONG, Incorporated5-775 Woodlawn Road WGuelph, ON N1K 1Y7You will need:SandpaperWeightScissorsGlueMADE IN CANADAWARNING!CHOKING HAZARD - CONTAINSSMALL PARTS. NOT RECOMMENDEDFOR CHILDREN UNDER 3 YEARSRECOMMENDED FOR AGESDifficulty RaƟngRemove and set aside the Axle (V), Ammo (W), andthe Cord (X). Sand both sides of the carrier boards firstwith 150 grit and then 220 grit sandpaper.Mirror Step 2 for the opposite side. Join the Front Frame parts (H, I) together and glue it inplace. Glue the End Frame (F) to the corner braces.Assemble the trough using the two Sides (K) and aBoƩom (J). Glue the trough to the base and frame.Glue a Corner Brace (G), an Outer Gantry Brace (C),and a Gantry Upright (D) to a Side Frame (A). Glue theside frame to the Base (B) and the Inner Gantry Brace(E) to the side frame.M I N I T R E B U C H E TCMYCMMYCYCMYKK1023 Mini Trebuchet Instructions.ai 1 2018-08-01 5:09:12 PMK1023 Mini Trebuchet Instructions.ai 1 2018-08-01 5:09:12 PM |
Related manuals for ABONG MINI TREBUCHET
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine