ACCESS CONTROL SOLUTION Eternity 4 Manual
                                    | |
Contents
| 
Page 19 of 36II. User SetupOnsite User Setting¾ Add/Edit user informationTo add/edit iButton / key code user, click “Add” button in the key setting menu, and following screen will pop up:To add iButton user, click ok and snap a user iButton key into the encoder. Click on the empty field of “Serial ID”,the iButton key ID will be detected by the system and automatically entered. If the user key already exists in the system,the software will pop up a warning. No duplicate keys are allowed in one system.To add key code user, check the “Key Code User” and click ok. Type in user code under Key Code field. Enter theUser profile as follows:• First name: Input the first name of the key owner.• Last name: Input the last name of the key owner.• Status: Active or Inactive (reserve for future use) User. We suggest not deleting any existing user for security reason.User can change the key status from Active to Inactive for a lost key or employee that left.• Department: User can either select the pre-input Department name from the pull down list, or input a new name inthe field. The new name will be saved to the Department list once the data saved.• Title, address: Can be entered as the key owner profile; photo of the owner can be uploaded to the program.(These are optional information fields)After input all the users, click “Save” button and all user keys/codes will be stored. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine