ACECO FC3001 Quick Start Manual
IntroductionThe Aceco FC3001 is the latest advance in hand-held radio frequency finder. It excels at finding frequencies for securemonitoring applications. It automatically and instantly tunes ICOM CI-V or AOR receivers to the frequency it finds. It iscompact, truly pocket-sized and is designed for ease of use and reliable performance. It comes complete with internalNiCd pack, AC wall charger, 7 section telescopic antenna and interface cable.SpecificationsFrequency range: 10 MHz - 3 GHzWeight: 210 gSize: 80 mm high x 68 mm wide x 31 mm deepImpedance: 50 Ohms (BNC Socket)Case: Stamped aluminum with black anodized finishBattery: Internal 4 x AA 600 mAH NiCd packPower: 9 VDC 300 mATimebase: Less than 1 PPM at room temperatureFeaturesl 7 digit Liquid Crystal Displayl Low power consumption (Average 6 hour battery life)l Supplied with NiCd pack, AC wall charger, telescopic antenna and interface cablel Automatically holds and tunes ICOM CI-V or AOR receiversl Filter prevents display of random noisel Hold switch to lock displayl Low battery indicatorl Ultra sensitive synchronous detector 16 section bargraph to show RF signal strengthl High speed counter with 1 KHz resolutionControls1. Power Switch. This slide switch turns the RF finder on which also initiates a 2 second self-test.2. Com Switch. This slide switch selects either the ICOM CI-V receivers or the AOR receivers.3. Filter Switch. Slide the switch to turn the filter on and off.4. Hold Button. This holds the current display and stops the RF finder from counting.5. Function Button. This selects the frequency or period. This button has four settings. One each for displayingfrequency or period as these are received, and two settings for automatic hold and tune of the first frequency orperiod found.6. Calibration. The calibration adjustment opening is located on the front panel of the RF finder. This allows access tothe trimmer capacitor that provides about a 10 PPM adjustment range of the time base oscillator. This is not usuallynecessary but to do so read a signal of a known frequency before adjusting the trimmer for correct frequency display.If you calibrate at 4.1943 MHz or above then the RF finder will be more accurate.WarrantyAceco Electronics, Corp. guarantees the RF finder and its accessories for one year against defects in manufacture. Thiswarranty does not cover items that have been modified, subject to unauthorized repairs, misuse or abuse. This warrantydoes not cover damage caused by excessive power levels applied to the signal input. Never make any kind of connectionbetween the RF finder and a transmitter.ACECO FC3001RF FINDER |
Related manuals for ACECO FC3001
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine