ACERBIS 0026077 Manual
  |
TTINNNGFLNZ1Z2ZHOZ3CNAUOEM PARTSACERBIS PARTSCOD. 500009189HONDA TRANSALP XL750 L fuel tankSERBATOIO TRANSALP XL750 L1 2Remove the original seat and radiatorshrouds.Rimuovere la sella ed i fianchetti originali.Unhook the original pins from the carter,then remove the original tank.Sganciare i pin originali dal carter esuccessivamente rimuovere il serbatoiooriginale.3Apply the four brackets (I) with the screws(N) and insert the original rubbers (T). Applythe bracket (C) using the screws (N) on theAcerbis fuel tank (A).Applicare le quattro staffe (I), tramite le viti(N) ed inserire i gommini originali (T).Applicare la staffa (C) tramite le viti (N) sulserbatoio Acerbis (A).4Apply the two brackets (L) with the screws(N) and insert the original rubbers (T). Insertthe screw (G) and the bushing (F).Applicare le due staffe (L) tramite le viti (N) einserire i gommini originali (T). Inserire la vite(G) e la boccola (F).5Insert the pump (Z) and the gasket (Z1)using the screws (H) and washers (O).Inserire la pompa (Z), la guarnizione (Z1), laguarnizione (Z2) e la flangia (Z3) tramite leviti (H) e le rondelle (O).Durante il rimontaggio suggeriamovivamente di utilizzare un grassoanti-grippante sulle viti che entranonegli inserti in metallo.Higly suggest to use anti-seize/greaselubricant on all bolt threads going intothe tank’s metal inserts whenreinstalling.WARNINGA - (1 PCS) I - (4 PCS) L - (2 PCS) M - (1 PCS) N - (14 PCS)E - (2 PCS)F - (1 PCS) G - (1 PCS) H - (6 PCS)O - (6 PCS) P - (2 PCS)D - (1 PCS)B - (1 PCS) C - (1 PCS)Z - (1 PCS) Z1 - (1 PCS) Z2 - (1 PCS) Z3 - (1 PCS) J - (2 PCS)Q - (2 PCS) S - (1 PCS) V - (1 PCS)T - (6 PCS)WARNING!It is EXTREMELY IMPORTANT that the fuel tank is properly installed. To ensure proper installation, it is STRONGLY RECOMMENDED that the tankis installed only by a qualified OEM licensed dealership mechanic. Improper installation could result in serious injuries or death.If self-installed NOTE THE FOLLOWING: particular attention must be paid to excessive fuel line length and fuel line proximity to hot engine areasand pipes to prevent fire.Clean tank interior thoroughly before installation. Install this fuel tank only in a well ventilated area, as gasoline fumes are extremely dangerous.Do not start or operate the vehicle if there are any fuel leaks! Read all instructions first before beginning installation.Acerbis recommends that installation must be done by a licensed mechanic and that only Acerbis’ original parts are used during installation.Acerbis makes no guarantees or representations, express or implied, regarding the fitment of its product for any particular purpose. Acerbismakes no guarantees or representations, express or implied, regarding the extent to which its products protect individuals or property frominjury or death or damage.ACERBIS ITALIA S.P.A.VIA SERIO, 3724021 ALBINO (BG)EUROPE U.S.A. UNITED KINGDOMACERBIS U.S.A. INC.MAIL P.O. BOX 2030SUN VALLEY, ID 83353SHIP 110 LINDAY CIRCLEKETCHUM, ID 83340U.S.A.ACERBIS U.K LTDUNIT 4 DUNFERMLINE COURT,KINGSTON, MILTON KEYNESMK10 0BYGREAT BRITAINITALYR - (2 PCS) U - (2 PCS) |
Related manuals for ACERBIS 0026077
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine