Viper 4040 User ManualRevision 3, Oct 2012 5 Main Rotor Track & Balance – 5-33time. If you wish to stop the job temporarily, press the “Main Menu” key or simply turnthe analyzer off.When you have finished entering the adjustments performed, press [ENTER] to continue tothe next screen.5.3.12.2. – Example Solution Screen #2The second solution the analyzer gave for our sample job is for the average verticalmeasurement from flight at 80 knots and flight at 120 knots. The adjustment type for thischart is degrees of trim tab. For the current run, if you chose to make the pitch linkadjustment as recommended in the previous screen, you would most likely skip the trim tabadjustment. Do this by pressing the [F2] “Inst=None” key and then [ENTER].5.3.12.3. – Example Solution Screen #3
