ACI Farfisa Single Channel DVR User Manual
                                | |
5-1. Log-in1. Log-in93) Use button to enter password that has 1 to 8 digits with numbers from 1 to 4.4) Use [MENU] button to change.1) Press [MENU] button to enter the system menu after starting the system.2) LOGIN DVR SYSTEM window appears as shown above.- Factory default password is as below.ADMIN(Adminstrator mode) : “1” USER (User mode) : “2”NOTICE : We recommend you to enter your own password as per procedure in 5-4)- - (page.23)85) After entering the password, press [ENTER] button to go back to the system menu.NOTICE : When logged into USER MODE, only DISPLAY SETUP and TIME/DATE TYPE SETUP ispossible.23 12 4LOGIN DVR SYSTEMPASSWORD < >: INPUT PASSWORD: ERASE PASSWORD: ENTER OR EXIT1,2,3,4MENUENTERNOTICE : Be sure to memorize the changed password.- If password entered matches previously set number, “ADMIN GRADE LOGIN OK” message appears.ALL ABOUT IMAGE RECOGNITION & PROCESSING1 channel stand-alone DVR 5. OperationEnter the passworddefault P/W : 11Input or modify2If password entered does not match previously set number “CURENT PW INPUT ERROR” messagedisplayed.NOTICE : To protect hard drive from damaged, turn off the power switch of DVR unit after you firstpress [MENU] button. If you press [MENU] button, DVR unit stops recording, and HDDhead is not in the process of writing.Gn |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine