ACKme Networks AMW004-E02 Marlin User Manual
                            | |
AMW004 EvaluationUsing WiConnect, Section 3ARG-MW004E-105R • AMW004 Evaluation Guide Page | 6©2014 ACKme Networks. http://ack.me February 27, 20153.2 System Indicator LEDsThe Mackerel evaluation board comes with three system indicator LEDs and two user LEDs. The LED functions areconfigurable, using the WiConnect peripheral commands and variables. See http://wiconnect.ack.me for moredetails., in particular the variables system.indicator.gpio and system.indicator.state.By default the system indicator LEDs are configured as follows:LED Function BehaviorRed Soft AP Indicator Off Soft AP offFast blink Soft AP errorMedium blink Soft AP activeSlow blink Client connectedYellow Network Indicator Fast blink No IP addressMedium blink DHCP in progressSlow blink DHCP successful, IP address obtainedGreen WLAN indicator Off Wi-Fi offFast blink ErrorMedium blink Connecting to APSlow blink Joined to APBlink rates are as follows: Fast blink: 4Hz, Medium blink: 1Hz, Slow blink: 0.5 Hz3.3 Scanning for Wi-Fi NetworksTo scan for Wi-Fi networks in range, use the wlan_scan command. Each AP in range is listed on a separate line.> wlan_scan -v!3 found! # Ch RSSI BSSID Rate Security Mode Len SSID#00 06 -27 84:1B:5E:29:9D:F7 450.0 WPA2-Mixed Inf 17 YOUR_NETWORK_NAME#01 11 -73 2C:B0:5D:31:6F:6A 300.0 WPA2-AES Inf 6 button#02 11 -73 EC:1A:59:36:5B:6C 144.4 WPA2-Mixed Inf 5 REGIS3.4 Joining a Wi-Fi NetworkSeveral methods are available to configure and join the AMW004 module to a Wi-Fi network.Web SetupWiConnect provides the option to use a web browser running on a network client (such as a smartphone, tablet orcomputer) to select the remote Wi-Fi network the AMW004 module should join, and to enter a password for theremote network.When web setup is used, it is helpful to think of the network client as the keyboard and display for the module asshown in Figure 4.To start web setup mode, enter the command setup web. WiConnect starts the local network and web server asindicated by the final message: In progress.> setup web[Disassociated]IPv4 address: 10.10.10.1 |
Related manuals for ACKme Networks AMW004-E02 Marlin
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine