ACKme Networks AMW006 Moray Evaluation Manual
                      | |
AMW006 Evaluation GuideUsing WiConnect, Section 3ARG-MW006E-100R • AMW006 Evaluation Guide Page | 5©2014 ACKme Networks. http://ack.me October 20, 2014Open the Wi-Fi settings on your smartphone, tablet or computer and join the network called WiConnect-######(where ###### are the last 6 digits of the Wi-Fi module MAC address). The password for the network is simply:password. The local network name and password, and the web address may be customised to suit your needs, seethe online WiConnect Reference Manual for further information.After joining the local network, open a web browser on the network client and go to setup.com. The WiConnect webpage appears (see Figure 3), and a scan begins for Wi-Fi access points in range. Select the remote network you wishto join, enter the network password then select Save & Exit and follow the prompts.Once the settings are successfully saved, WiConnect prints Web Setup Mode exited to the terminal. Check thatthe settings were successfully saved using get wlan.ssid and get wlan.passkey.Web Setup Mode exited> get wlan.ssidYOUR_NETWORK_NAME> get wlan.passkeyYOUR_NETWORK_PASSWORDScript SetupIf you prefer instead to enter configuration details for the Wi-Fi network, WiConnect provides a default setup scriptto step you through the process. The setup script is provided as a file called default_setup.script on theWiConnect file system. The setup script may be customised as required.> setup cmd> Enter Wi-Fi network name:set wlan.ssid YOUR_NETWORK_NAMESet OK> Enter Wi-Fi network password:set wlan.passkey YOUR_NETWORK_PASSWORDSet OK>set wlan.auto_join.enabled trueSet OK> Saving settingssaveSavedSuccess>network_up[2014-05-17 | 11:48:31: Associating to YOUR_NETWORK_NAME]In progress> Security type from probe: WPA2-MixedObtaining IPv4 address via DHCPIPv4 address: 192.168.0.31[2014-05-17 | 11:48:41: Associated]> Exiting Cmd Setup ModeManual SetupIt is straightforward to manually enter the name and password for the network using the wlan.ssid andwlan.passkey variables too. Be sure to save afterwards, or the values will be lost when the module reboots. Anysubsequent command requiring network access, such as an ICMP (Internet Control Message Protocol) ping,automatically results in the module attempting to join the network. |
Related manuals for ACKme Networks AMW006 Moray
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine