ACME BH05 User Manual

Contents

ACME BH05 User Manual Manual pdf 5 page image

5GBSwitch the call between phone and headsetDuring a conversation, press and hold the Answer/end button for 2 Seconds, the BH05 willbe switched off and the call will be transferred to your mobile phone. If you want to transferthe call back to your BH05 press and hold the Answer/end for 2 seconds till you hear a beep.Release the button and the call is transferred back to your BH05.Battery informationYour device is powered by a rechargeable battery. The full performance of a new battery isachieved only after two or three complete charge and discharge cycles. The battery can becharged and discharged hundreds of times, but it will eventually wear out. Recharge yourbattery only with compatible chargers designated for this device.Unplug the charger from the electrical plug and the device when not in use. Do not leave afully charged battery connected to a charger, since overcharging may shorten its lifetime. If leftunused, a fully charged battery will lose its charge over time.Never use any charger that is damaged.Leaving the device in hot or cold places, such as in a closed car in summer or winter conditions,will reduce the capacity and lifetime of the battery. Always try to keep the battery between15ºC and 25ºC (59ºF and 77ºF). A device with a hot or cold battery may not work temporarily,even when the battery is fully charged. Battery performance is particularly limited intemperatures well below freezing.Do not dispose of batteries in a fire as they may explode. Batteries may also explode ifdamaged. Dispose of batteries according to local regulations. Please recycle when possible.Do not dispose as household waste.Care and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care.The suggestions below will help you protect your warranty coverage.· Keep all accessories and enhancements out of the reach of small children.· Keep the device dry. Precipitation, humidity, and all types of liquids or moisture cancontain minerals that will corrode electronic circuits. If your device does get wet, allow it todry completely.· Do not use or store the device in dusty, dirty areas. Its moving parts and electroniccomponents can be damaged.· Do not store the device in hot areas. High temperatures can shorten the life of electronicdevices, damage batteries, and warp or melt certain plastics.· Do not store the device in cold areas. When the device returns to its normal temperature,moisture can form inside the device and damage electronic circuit boards.· Do not drop, knock, or shake the device. Rough handling can break internal circuit boardsand fine mechanics.· Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.· Do not paint the device. Paint can clog the moving parts and prevent proper operation.All of the above suggestions apply equally to your device, battery, charger, or any enhancement.If any device is not working properly, take it to the nearest authorized service facility.