ACME LED-MS350B User Manual
                        | |
15B3. Universal DMX controllerNo need to turn the unit off when you change the DMX address, as new DMX address setting willbe affect at once. Every time you turn the unit on, it will show “ ” on the display and moveall the motors to their ‘home’ position and you may hear some noises for about 20 seconds. Afterthat the unit will be ready to receive DMX signal or run the built in programs.4.1 Master/Slave Built In Preprogrammed FunctionBy linking the units in master/slave connection, the first unit will control the other units to give anautomatic, sound activated, synchronized light show. This function is good when you want aninstant show. You have to set the first unit in master mode and select (show 1),(Show 2), (Show 3) or (show 4) mode. Its DMX input jack will have nothingplugged into it, and its master LED will be constantly on and sound LED will flash to the music. Theother units will have to set in slave mode and select (normal) or (2 light show)mode. Their DMX cables plugged into the DMX input jacks (daisy chain) and the slave LED lightswill be constantly on.2‐light showIn slave mode, means the unit works normally and means 2‐light show. In order tocreate a great light show, you can set on the second unit to get contrast movement to eachother, even if you have two units only.4.2 Easy ControllerThe easy remote control is used only in master/slave mode. By connecting tothe 1/4” microphone jack of the first unit, you will find that the remotecontroller on the first unit will control all the other units for Stand by,Function and Mode selection. |
Related manuals for ACME LED-MS350B
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine