3Important: Acme Supreme Juicerator® should be unplugged from outlet whendisassembling and assembling.dISaSSembLIng• After removing your new Juicerator®from the box, you may want tofamiliarize yourself with the parts bydisassembling the unit and washingthe top parts. (See Figure 1)• With Juicerator® facing you(spout front), put your hands onboth sides of the cover. Using theside arms for leverage, push backwith your left hand and pull forwardwith your right turning the coverclockwise. This will disengagethe cover from the spring clips andallow disengage the lid safetyinterlock.• Look into Juicerator® andremove clutch by unscrewingcounterclockwise.• Lift out cutter blade.• Lift out strainer basket.• Lift off juice bowl.aSSembLIng• Place bowl on motor base housing and place the spout facing frontbetween the two raised projections on the motor base housing.• Place strainer basket inside the bowl over the hex nut. Be certain thestrainer basket sits flat.• Place cutter blade inside strainer basket with teeth up.• Tighten clutch by hand until tight or snug.• If using disposable filter, insert it flat against the holes around the inside ofthe strainer basket. Once the Juicerator® is running, centrifugal force willpush the filter into perfect position.• Place cover on juice bowl with feed chute at the right rear, grip the sidesof the lid firmly and turn counterclockwise to engage the spring clips andthe safety interlock.Figure 1