ACME Solaris CM-S6 User Manual

Contents

ACME Solaris CM-S6 User Manual Manual pdf 6 page image

POWER On Power onDMX On DMX input present2. Display: To show the various menus and the selected function.3. Button:MENU To enter into move backward or leave the menuUP To go backward to move up in the menuDOWN To go to move down in the menuENTER To perform the desired functions4. DMX input:DMX512 link, use 5-pin XLR cable to link the unit and DMX controller5. DMX input:DMX512 link, use 3-pin XLR cable to link the unit and DMX controller6. DMX output:DMX512 link, use 5-pin XLR cable to link the next unit7. DMX output:DMX512 link, use 3-pin XLR cable to link the next unit8. ETHERNET:Transfers fixture’s information to a main controller9. Power in: To connect to the mains supply10. Power out: Connects to the next unit11. Fuse (T 15A): Protect the unit from damage of over current.4. How To Set The Unit4.1 Main FunctionTurn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until therequired function is shown on the monitor. Select the function by the ENTER button. Use theUP/DOWN button to choose the submenu, press the ENTER button to store and automatically returnto the last menu. Press the MENU button or let the unit idle one minute to exit menu mode.In the event of disconnecting with mains power, press the UP button for one minute to enter intomenu mode. Press MENU button or let the unit idle one minute to exit.The main functions are shown below（the grayed boxes are preset settings）:5F