ACN IRIS 3000 Quick Installation Manual
Also see for IRIS 3000: User manualUser manualQuick start guideQuick start guideUser manual
  | |
2.B. Installation without Router1. Connect the handset to the connection point located on the side of yourACN Videophone.2. Unplug the existing Ethernet cable from your computer that connectsyour Cable/DSL modem to your computer. The other end of this cableshould stay attached to your modem. Connect the Ethernet cablethat you unplugged from your computer to the WAN port of your ACNVideophone.3. Connect one end of the new Ethernet cable (RJ-45) that came with yourVideophone, to the LAN port of the phone. Connect the other end to theEthernet port of your computer.4. Connect the power adapter to the power port and then plug it into anelectrical outlet.Note: Do not use Power Adapters from other devices.5. Turn the Power Switch to ON on your ACN Videophone.6. You will see a status line on your screen as your phone goes throughsetup. Once this is complete, the register light on the front of yourphone will turn green, and it is ready for use.Note: Simultaneous use of the computer and the Videophone will affectthe quality of the connection.If you do not have a computer simply connect your ACN Videophone toyour modem or router as described in step 2.Changing the Display LanguageAfter connecting your ACN Videophone for the first time you may want to change thelanguage setting for the display. You can select your preferred display language byfollowing these easy steps:3. Optional: Connecting existing/additionalphone(s) to your ACN VideophoneConnecting additional phones to your ACN VideophoneConnect one end of a phone cord to the phone port on your ACN Videophone. Theother end of the cord can connect to another phone. If you connect to a cordlessphone you can use your ACN Digital Phone Service anywhere in your home.2.A. Installation with Router (requires Router with free port)1. Connect the handset to the connection point located on the side of yourACN Videophone.2. Connect one end of the Ethernet cable (RJ-45) to the WAN port of yourACN Videophone. Connect the other end to an open Ethernet port onyour router.3. Ensure that your computer is connected to another port on your routeror via an existing Wireless (WIFI) connection4. Connect the Power Adapter to the Power port and then plug it into anelectrical outlet.Note: Do not use Power Adapters from other devices.5. Turn the Power Switch to ON on your ACN Videophone.6. You will see a status line on your screen as your phone goes throughsetup. Once this is complete, the register light on the front of your phonewill turn green, and it is ready for use.Note: Simultaneous use of the computer and the Videophone will affectthe quality of the connection.If you do not have a computer simply connect your ACN Videophone toyour modem or router as described in step 2.3. Select ‘Display’ and scroll down to‘Language’.4. Select one of the language options.1. Press MENU and select ‘Settings’. 2. Select ‘System Settings’.VideophoneQuick Installation Guide1. Check for Required ItemsYou should already have these components: Router/Cable or DSL Modem High Speed Internet accessAll of the following items should be included with your ACN Videophone.If an item is missing, please contact ACN Digital Phone Service Technical Support.Main Unit HandsetPower Adapter(with country specific mains adapter,where applicable)Ethernet Cable(RJ-45)Telephone Cable(RJ-11)Set-Up DiagramPhoneSocketCable or DSLModemComputerVideoPhone123Set-Up DiagramPhoneSocketCable or DSLModemRouterComputerVideoPhone123 |
Related manuals for ACN IRIS 3000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine