ACN DigitalTalk Express Quick Installation Manual

Also see for DigitalTalk Express: Installation guide Installation guide Installation guide

ACN DigitalTalk Express Quick Installation Manual Manual pdf 1 page image

Base UnitQuick Installation Guide©ACN CANADA 2018_ CA_DTExpressQIG_PRDT_P_011718FYI:If you only have an Ethernet port on your router or modem, you canconnect your computer to the network through the base unit. Connectone end of your Ethernet cable to the port labeled PC (silver) on thebase unit. Connect the other end to the Ethernet port of your computer.STEP 2 Setting Up the Handset1. Take off the handset cover and install the 2 AAA batteries.2. Replace the handset cover.3. Plug the AC Adapter into an outlet.4. Connect the AC Adapter to the handset charger.Please note: Make sure to repeat this process for any additional handsets.Handset2 AC AdaptersHandset CordEthernet Cable Index Sticker2 AAA BatteriesHandset ChargerBelt ClipSTEP 1 Setting Up the Base Unit1. Plug the handset cord into the handset and into the side of the base unit.2. Plug the AC Adapter into the outlet.3. Plug the AC Adapter into the back of the base firmly.4. Connect your Ethernet cable to theLAN port.5. Connect the other end of the Ethernetcable into an empty port in your Internet router.Once you have connected the base,the startup process will begin. Youwill notice that the status indicatoron the base unit is flashing. Thisindicates that the base unit is beingconfigured. You will see a series ofcolors on the status indicator.When your phone is ready to usethe status light will be solid green,which signals that your system isconfigured. This process may takeup to 5 minutes. Until that time, donot unplug, disconnect or change any settings on your phone.STEP 3 Registering Your Handset to the BasePlease follow these steps for EACH handset.1. From the handset press Menu using the center of the joystick.2. Then press #130 on the keypad of the handset.3. On the base unit, press and hold the ALL button for 4 seconds. Thestatus indicator will then turn red.4. When the handset starts ringing, press the ALL button on the base unitto stop.5. Press OK on the handset and hold until a long beep sounds.6. When the handset has been registeredsuccessfully , will change to .Congratulations on the purchase of your new ACN DigitalTalk® Express Phone System!Please follow these basic instructions to install your base and cordless phone. Once you are done, refer to the DigitalTalk® Express supportsection of myacncanada.ca for an online step-by-step tutorial on your new DigitalTalk® Express System and its functions.A D D I T I O N A L I T E M SCordless HandsetReview Enclosed ItemsFYI:To access your voice mail:Press Voice Mail on your base unit and enter your4-digit password (initially set to 1234). View theQuick Reference Guide for more ways to accessyour voice mail.Manage your DigitalTalk® Express account online in the My Account section of myacncanada.ca. This provides you with the ability to view andupdate your payment information, as well as additional support information.PC LANCongratulations! You have successfully connected your new DigitalTalk® Express phone system.NEXT STEP: Visit the DigitalTalk® Express support section of myacn.com for the online tutorial to show you all the features and functionalities of your phones.

/ 2

Related manuals for ACN DigitalTalk Express