10Network ConnectionTo access the internet, you must subscribe high speed broadband internet service from your internet service provider.Your TV can be connected to your home network in two ways:Wired, using the RJ45 (LAN) connector on the back panel.Wireless, using the internal wireless or external wireless USB adapter and your home wireless network.Modem InternetTV SetRouterEthernetPort on theback panelorWirelessUSB AdapterWireless RouterModemUSBport on theback panelTV SetConnecting to a wired networkTo connect to a wired network:1. Ensure you have:An ethernet cable long enough to reach your TVA router or modem with an available Ethernet portA high-speed internet connectionAn Ethernet (LAN) port on the back of the TV2. Connect your ethernet cable to the router and to theEthernet port on the back of the TV.3. Use the Network Settings to configure the TV.Connecting to a wireless networkTo connect to a wireless network1. Ensure you have:A router broadcasting a high-speed wireless signalA high-speed internet connectionA wireless USB Adapter (not need for a built-inwireless connection).2. The TV set with Wi-Fi Module.Note: Some models may have internal wireless module,then the wireless USB adapter is unnecessary. Someexternal wireless adapters cannot be campatible withthe TV.3. Use the Network menu to configure the TV.Note: This function is not available for certain models. Instructions below are just the usual ways to connect your TVto the wired or wireless network. The connection method may be different depending on your actual networkconfiguration. If you have any questions about your home network, please refer to your ISP (Internet Service Provider).