This amplifier is fi tted with a balance control which allows the volume of the left and right signals of the stereo image to be altered in order to compensate foran off-centre listening position.To activate the balance control press the function key (9) three times to change the LCD display to the balance control.The last setting for the balance will be displayed.To change this balance setting turn the rotary control (10) either clockwise or anticlockwise to decrease the signal levels in either the right or left speakers.There are 32 steps around the centre position for attenuation, adjust this control for your desired listening balance.Note: following this operation, the LCD display will return to indicate the default volume setting if no operation occurs within 5 seconds. To reactivate balancecontrol it will be necessary to press the function button again three times.BALANCE CONTROL11