ACP MenuMaster RFS Subway Series Service Training Manual
                                    | |
16Disassembly1. Disconnect power to oven and remove outer case.2. Disconnect and label wires from controller/timer.3. Open oven door.4. Remove screw securing top of control panel to cavity. Lift control panel up and out to release tabs.Disconnecting Wire TerminalsAll wire terminals are locking-type terminals.Proceed as follows to disconnect wire terminals:Insulated terminals:Grasp insulator pod and pull back. DO NOT PULL ON WIRE.1 Grasp WireInsulatorPod 2 PullNon-insulated terminals:Use a small blade screwdriver to depress locking-tab and pull on terminal. DO NOT PULL ON WIRE.1 Releaselocking-tab Wire2 PullControl Panel Removal |
Related manuals for ACP MenuMaster RFS Subway
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine