ACR Electronics GLOBALWATCH2 AIS - INSTALLATION MANUAL V1.0 Installation Manual

Also see for GlobalWatch 2 AIS: User manual

Contents

GlobalWatch 2TM AIS Installation Manual 14 Version 1.0Select Submenu 3 “Change MMSI/IMO” with cursor button [Up] & [Down] by pressing Nr. 3on the keyboard.Input new MMSI / IMO Numbers and press [Save] to store input data. Press [Back] to returnto the Submenu without saving.Note:The IMO number 303174162 has to be deleted. If the ship has no IMO registration, then usenumber 0 or number 1. It is very important that a number with one digit has to be used!N 1^21' E 0^14' |1>0.01|2>1.30|3>1.80nm|----------------------------------| 6. Service Configuration-----| || +- 1. Change Service PasswordView | +- 2. User Password Settings| +- 3. Change MMSI / IMO-----| +- 4. Restore Factory Settings|Msg. ||-----||Displ|----------------------------------------NUM| Select->| | |<-BackN 1^21' E 0^14' |1> N/A|2>0.00|3>0.10nm********** Change MMSI / IMO ***********MMSI :1193046IMO No.:303174162----------------------------------------NUM| Save | | | BackY1-03-0183-1 Rev. A