ACR Electronics HydroFix 9490 Installation Procedures Manual

Contents

ACR Electronics HydroFix 9490 Installation Procedures Manual Manual pdf 14 page image

Y1-06-0209G 13SECTION 7 – INSTALLING THE HRU IN AN OPENFACED BRACKETThe ACR open faced bracket is adiscontinued product that looks like this:Contents of the HydroFix™ HRU Kit that you will need:HydroFix™ ReplacementHydrostatic Release unit (E)Open faced release rod (C)2 Mounting bracket adapters (J)Mounting rod adapter, metal (L)Small cotter pin (G)4 Mounting bracket screws (F)HRU Expiration Label (K)Slotted spring pin (I)Tools required: Phillips-head screwdriver,pliersInstructions:1.) Unscrew the four side screws removing the front cover from thebottom mounting plate, keeping the screws.2.) Unscrew the spring loaded HRU Rod from the bracket and removethe expired HRU. Discard all HRU rods and components.3.) Align mounting bracket adapters (J) with the screw holes on thebottom mounting plate (see Figure A).4.) Using the 4 screws removed from the front cover; loosely attachmounting bracket adapters (J) to the bottom mounting plate. Someadjustments may be needed to align the bracket screw holes withthe screw holes on the bottom mounting plate.5.) Mark the expiry date on the HRU according to the instructions inSection 3.