ACR Electronics NAUTICAST INLAND AIS User Manual

Also see for NAUTICAST inland AIS: Manual Installation manual Manual Manual Installation manual

Contents

User Manual 21 Y1-03-0211 Rev. B3.1.1 Own Vessel DataLAT:N 1°27.845'ExtSOG:34.6kn 05/26/06LON:E 0°21.289'IntCOG:173.0° 10:52:26LAT: LatitudeLON: LongitudeDate: The actual UTC - date (MM.DD.YY) and time (hh.mm.ss) are displayed on the topright hand corner of this view.IntGPS: 3D A/ ExtHDT:222° Reg6IntGPS Indicates normal or differential mode of GPS position.2D or 3D: Indicates the precision of the GPS result.Indicates the used position source:intGPS. = internal GNSS receiverextGPS = external GNSS receiver (sensors)A/B: (A or B) Indicates the last transmitting channel in use.ExtHDT True HeadingReg: Indicates the actual region of own vessel’s position. If no region number is displayed,then the vessel is traveling on high sea and is outside a predefined region.Message (SRM) IndicationLAT:N 1^27.845'ExtSOG:34.6kn *3SQueued safety related messages, e.g. *3S are displayed in the date field (instead of the date) – inthe above example 3 Safety Related (3S) Messages are queued, and await viewing and handling(acknowledgement or reply) in the Message Inbox History.Alarm (ALR) and Text (TXT) IndicationIntGPS: 3D /B Reg6 ! 3A 2TQueued alarms or messages, e.g. ! 3A 2T are displayed in the 3 rd line – in the above example3 (3A) Alarms and 2 (2T) Text Messages are in queue, and await viewing and handling(acknowledgement and reaction).BlueSign IndicationBlueSign: ON **RTA** AISMode: INLANDThe “BlueSign” indication is the status of the external “Blue Sign” - switch. Once the pins areconnected, the BlueSign information will be transmitted in the position message an indicated in thisfield.RTA IndicationBlueSign: ON **RTA** AISMode: INLAND