4.6 Service and User PasswordsWARNING: It is very important that the Service password not be lost. Keeping thepassword in a second location may be wise. Record your custom service and user passwordsin the table provided in the appendix of your User Manual. Memorizing the password is best.If you lose this password, you cannot make any further configuration changes: Access to theAIS is blocked. Another master key is not available and the unit would have to be returned tothe ACR Service centre. This service is not free of charge.Once you have entered the system, please change the default password to your ownpasswords, for both levels of access. Use different passwords for the different security levels.Your passwords must meet the following criteria:Minimum of six (6) characters, maximum of eight (8) charactersLetters must be in UPPER CASEAcceptable characters are the A-Z alphabet and 0- 9 digitsPassword may contain both letters and numbersThe User Password can be reset in the service configuration menu by entering the ServiceConfiguration menu and creating a new password.Changing the Service PasswordSelect “Service Configuration” from the Main Menu with the cursor button [Up] & [Down] orpress Number 6 on the keyboard.The password query field appears. Input default Service Password and press M5 [Enter]. Thedefault password from the factory is mentioned on your AIS display at the protection foil.Please see the appendix in your User Manual for additional password information.Select Submenu 1 “Change Service Password” with cursor button [Up] & [Down] by pressingNumber 1 on the keyboard.N 1o24' E 0o17' |1>0.10|2>1.30|3>1.80nm----------------------------------------++++++++++++++++++++++++++++++++++++++++Service password protected!Please enter service password:++++++++++++++++++++++++++++++++++++++++----------------------------------------| Enter | | | ExitY1-03-0212H45