User Manual 51 Y1-03-0203 Rev.Lb) Region SettingsA Region is a defined area, with specific VHF parameters, which are sent out by Vessel TrafficService Stations (VTS), and received via Digital Selective Calling (DSC) or AIS.The screen shows a list of Regions, and their input sources. When the vessel enters into one of thepre-defined Regions, the NAUTICAST automatically switches to the relevant Region Setting. If aRegion Number is vacant, then the relevant Region Name Slot is currently unoccupied.Tip: For fast Region Selection, press the Region Number on the keyboard and the selected region isimmediately displayed.Dynamic Keys: Region Settings[M5] [Select] Confirm RegionNumber Selection [M8] [Back] Return to MenuConfiguration[M6] [New] Create New RegionOverview of Region SettingsName Region Number Number of pre-defined RegionValid OK Status of Region Setting - OK: Stored and ValidSource A:AddrChM A: Addressed Channel Management (Msge. 22)Source: VTS via AISB:BcastChMB: Broadcast Channel Management(Msge. 22)Source: VTS via AISC:AIS_ChAs C: AIS Channel Assignment SentenceSource: Manual ECDIS InputD:DSC_Ch70 D: Channel 70 TelecommandSource: Digital Selective CallingM:OpManual M: Operator Manual InputSource: Via DisplayDaysOld Period of time Region Setting isstoredDays, hours, minutes, seconds(dd hh:mm:ss)In use Region 6 Region Setting of vessel current operationN 1o18' E 0o12' |1>0.10|2>1.30|3>1.80nm*********** Region Settings ************..Name....Valid...Source.......DaysOld..1>Region 1 OK A:AddrChM 2 06:21:592>Region 2 OK B:BcastChM 37 09:36:143>Region 34>Region 4 OK ? N/A N/A5>Region 5 OK M:OpManual 23 11:02:406>Region 6 OK C:AIS_ChAs 10 12:39:177>Region 78>Region 8 OK D:DSC_Ch70 27 05:56:349>Region 9 OK C:AIS_ChAs 9 17:08:46In use:Region 6----------------------------------------NUM| Select->| New | |<-Back