ACR Electronics ResQLink PLB-400 Product User Manual

Also see for ResQLink: Specification Instruction manual

Contents

ACR Electronics ResQLink PLB-400 Product User Manual Manual pdf 26 page image

Y1-03-0343 Rev. A Company Confidential26Appendix A – AccessoriesCustom ACR SkinsCustom ACR skins are available for both the PLB-400 and PLB-425 models. The PLB-425comes with two skins (Camouflage and Aqua Marine as shown in the image below)included when purchased. Additional skins will be available for both the PLB-400 andPLB-425 at www.acrartex.com. Use of these exclusive ACR skins allow PLB-400 andPLB-425 beacon owners to create a customized beacon tailored to their specific lifestyleand preferred activities.Application of the skins to the beacon’s face is simple. Simply remove the skin from itsliner and apply to the face of your PLB-400 or PLB-425 using the LED cutouts in theskin as a guide for correct placement. Once the skin has been applied to the face of thebeacon, the matching antenna arm skin can be applied to the section of the antennaarm which covers the Power (on/off) button on the face of the PLB.Users can keep the skins on the face of their beacon and on the antenna arm Powerbutton cover for as long as they like. If at any time the user wishes to remove theskins, simply peel the skins off of the PLB (the adhesive used to adhere the skins to thePLB does not leave any residue so users can choose to not apply another skin andsimply use the beacon in the form it was when purchased, or they can choose to applya different skin design to the beacon). Please note that the skin applied to the face ofthe PLB should be removed by peeling the skin from either the bottom right or leftcorner of the skin. As can be noted, the skin for the face of the beacon is slightlysmaller than the face of the PLB and intentionally creates an area at either the bottomright or left of the face of the PLB where the skin can be peeled off without interferingwith the main face label of the PLB (as can be seen below, there are instructions on theskin liner indicating the corners which should be used when peeling the skin off of thePLB).