|
Copyright © Acronis, Inc., 2000-2007 87/compression:[0…9] Specify the data compression level.It ranges from 0 to 9 and is set to 3by defaultAny/split:[size in MB] Split the backup into parts of thespecified sizeOther than ASZGeneral options/oss_numbers Declares that numbers of partitionsin the /partition option areadjusted for MBR partition tablerather than be simple ascendingnumbers. This means that primarypartitions have numbers 1-1, 1-2, 1-3 (and 1-4 if there are not logicalpartitions on the disk) and logicalpartitions numbers start with 1-4.For example, if the disk has oneprimary and two logical partitions,their numbers can appear asfollows:/partition:1-1,1-2,1-3 or/oss_numbers /partition:1-1,1-4,1-5Any/reboot Reboot the server after theoperation is completedAny/log:[file name] Create a log file of the currentoperation with the specified filenameAny14.1.3 Specific options (options specific for individual trueimagecmdcommands)Option Descriptioncreate/harddisk:[disk number] Specifies the hard disks to include into the image file by numbers.The list of available hard disks is provided by the /list command.An image may contain data of more than one hard disk. In thatcase, separate disk numbers by commas, e.g.:/harddisk:1,3/partition:[partitionnumber]Specifies the partitions to include into the image file by numbers.The list of available partitions is provided by /list. Partitionnumbers are specified as -, e.g.:/partition:1-1,1-2,3-1Dynamic volumes are specified by letters, e.g.:/partition:C,E/file_partition:[partitionletter]Specifies the partition where the image file will be stored (by letteror number). This option is used with /filename:[file_name]. Inthat case the file name must be specified without drive letter or rootfolder. For example:/file_partition:D /filename:”\1.tib”
PreviousNext |