ACS contsys DAL-311x0x0S Operating Instructions Manual

Contents

ACS contsys DAL-311x0x0S Operating Instructions Manual Manual pdf 5 page image

ACS-CONTROL-SYSTEM GmbH l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l info@acs-controlsystem.de 52. Assembly32. AssemblySealing48,03,0139,0M3Gap for physical unit1. After removing the fixing elements, insert the device.2. Check the seal to make sure it fits securely.3. Click the fixing elements back into place and tighten the clamping screws by hand. Then use ascrewdriver to tighten them another half a turn.CAUTION! The torque should not exceed 0.1 Nm!The dimension symbols can be exchanged before installation via a channel on the side!Please read the Safety advices on page 35 before installation and keep this user manual for future reference.