ACTi A950 Hardware Manual
Also see for A950: Firmware manualQuick installation guideFirmware manual
                         | |
Contents |
www.acti.comHardware Manual23Use the default IP address of the cameraIf there is no DHCP server in the given network, the user may have to manually assign the IPaddresses to both the PC and the camera to make sure they are in the same network segment.When the camera is plugged into the network and it does not detect any DHCP services, it willautomatically assign itself a default IP:192.168.0.100Whereas the default port number would be 80. In order to access that camera, the IP address ofthe PC has to be configured to match the network segment of the camera.Manually adjust the IP address of the PCIn the following example, based on Windows 7, we will configure the IP address to 192.168.0.99and set Subnet Mask to 255.255.255.0 by using the steps below:1 23 4 |
Related manuals for ACTi A950
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine