2-102.1.2 Insert the cableThere are two conduit holes, one is at the dome bottom and the other one isat the side of rugged dome with plug. Remove the plug if your cable will gothrough the one at the side of rugged dome2.1.3 Connect cables to connectorsPlease follow the instruction at Chapter 2: Physical Description, for how toconnect to each connector.

fcc/ce regulation

package contents

features and benefits

safety instructions

installation procedure

insert the cable

led description

adjust the camera

ACTi ACM-7411 Series Hardware User Manual

dimension diagram

product specification

ACM-7411 Series

quick installation guide

getting started

connect the ip outdoor rugged dome

connect cables to connectors

quick tour

Procedures

Step 2: Prepare for Waterproof Installation

Waterproof Solution with Naked Cable

Waterproof Solution with Conduit

Step 3: Install the Straight Tube

Step 4: Install the Mount Kit

Step 5: Open the Dome Cover

Step 6: Install the Camera to the Mount Kit

Step 7: Connect the Cable(s)

Step 8: Access the Camera Live View

Appendices

access the camera

Focus and Viewing Angle Adjustments

D8x / E8x Series

KCM-7111

KCM-7311

Installing Extension Tubes

Removing the Dome Cover

Safety Information


Contents fcc/ce regulation Table Of Contents package contents features and benefits safety instructions installation procedure insert the cable led description adjust the camera	2-102.1.2 Insert the cableThere are two conduit holes, one is at the dome bottom and the other one isat the side of rugged dome with plug. Remove the plug if your cable will gothrough the one at the side of rugged dome2.1.3 Connect cables to connectorsPlease follow the instruction at Chapter 2: Physical Description, for how toconnect to each connector. Previous Next / 20