ACTi D61 Hardware Manual

Also see for E68: Hardware manual Hardware manual

Contents

ACTi D61 Hardware Manual Manual pdf 7 page image

www.acti.comHardware Manual7Physical DescriptionORD61, D62, E66, E67, E68 D64, D65, E61, E62, E63, E64, E65, E691) Reset ButtonThe purpose of reset button is to restore the factory default settings of the camera, includingadministrator’s password.The reset button can be used for following purposes:1. The administrator’s password has been forgotten and therefore the camera cannot beaccessed.2. In case of IP address, mask, or allow/deny filter related issues, resulting with inability tomodify these settings.3. In case of connectivity issues or abnormal video quality.How to do the reset properly?Step 1: Disconnect the power supply (e.g. disconnect the Ethernet cable with PoE).Step 2: Press and continue to hold the Reset Button (using a pin).Step 3: Connect the power supply while keeping the Reset Button pressed.Step 4: Wait for 45 seconds and release the Reset Button.2) MicroSDHC Card SlotThis slot only supports MicroSDHC standard. Do not use the MicroSD standard card. The card isnot included. For more information about how to operate with MicroSDHC card, please refer tothe Firmware User Manual.3) Ethernet PortThe IP device connects to the Ethernet via a standard RJ45 connector.