ACTi E31 Hardware Manual
Also see for E33: Hardware manualHardware manualUser manualSpecificationsUser manual
                                  | |
Contents
|
www.acti.comHardware Manual20Step 1: Remove the Pre-installed Network Cable (“Pigtail”)1. Loosen the three (3) screws to detach the back cover.NOTE: A cable is connected inside the camera; do not abruptly pull the backcover.2. Disconnect the network connector (A) and remove the sealing nut (B).3. Pull out the network cable from the back cover and disassemble the parts asmarked below.4. Squeeze the seal to pull out the connector and then completely remove the seal,claw, and sealing nut from the network cable.Sealing NutClawSeal(A)(B)VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299 |
Related manuals for ACTi E33
manualsdatabase
Your AI-powered manual search engine