www.acti.comHardware Manual15Step 2: Open the Dome CoverNOTE: To avoid scratches or leaving fingerprints on the dome cover, it is recommended to retainthe plastic covering the dome cover until the camera is completely installed. However, the plastichas been removed on the pictures in this documentation to show clarity of the procedures beingdescribed.1. If the cables will pass through the surface, remove the metal cap covering the bottom conduithole of the camera, and attach the cap to the side hole to close it. The cable(s) will be routedto pass this hole from the surface.2. Loosen the three (3) screws securing the dome cover.
