www.acti.comHardware Manual22Other ConnectionsThis section describes the procedures in preparing the external devices that you can connect tothe camera. The camera supports DC12V power input, Digital Input and Output (DI/DO) andAudio Input and Output devices using the bundled terminal blocks. The use of these devices,however, is optional.Connecting a Power Adapter (Optional)In case of using a non-PoE switch or your PoE switch has limited power supply, you canpurchase a power adapter and directly connect the camera to a power outlet. The power adaptermust be connected to the supplied terminal block before use.To do this, follow the procedures below:1. Loosen the screws of the 12V and GND pins of the power terminal block.2. Take note that a standard power adapter cable has two (2) different wires:White stripe: Connects to 12V PinConnects to GND Pin