ACTi TCM-4301 User Manual

Also see for TCM-4201: Application note Specifications

Contents

ACTi TCM-4301 User Manual Manual pdf 10 page image

www.acti.comTCM-4301 Hardware User’s Manual10Basic ConnectionsFollow the procedures below to connect the IP device to the respective apparatuses.If you have a PoE(Power over Ethernet) supported switch or injector:1) Connect your IP Box Camera to the Switch / Injector by CAT5 or CAT6 cables with RJ45connector.2) Connect your Switch / Injector to PC with another CAT5 / CAT6 network cable.If your switch does not support PoE, and you are powering the camera with poweradaptor:1) Connect the power adaptor to IP Box Camera2) Connect IP device’s Ethernet port to Network switch (via RJ45 connectors).Connect a PC to the Ethernet switch (via RJ45 connectors)Please refer our PoE Guide for more details on Power over Ethernet related concepts.