ACTiSYS ACT-IR220L User Manual

Also see for ACT-IR200L: User manual User manual User manual

Contents

ACTiSYS ACT-IR220L User Manual Manual pdf 11 page image

ACTiSYS Corp. Serial-IR Dongle Installation ManualRelease 1.5ACTiSYS Corporation 2001 All Rights Reserved11WINDOWS 2000 INSTALLATION GUIDENote: If you do not change your computer BIOS setting, STOP here and go to Chapter BIOS SETUP.Note: If your computer system has installed some device on the same com port before, you MUSTproperly uninstall the devices first. ACT-IR220L+/220L/200L would NOT work with your system any more ifthe devices are uninstalled improperly because some drivers are still there and cause conflicts withACT-IR220L+/220L/200L driver. You HAVE to re-install your Windows 2000 again.Note: If your computer system has installed a FIR device before, ACT-IR220L+/220L/200L would NOTwork with your system any more. You HAVE to re-install your Windows 2000 again.Note: If you want use Virtual COM Port in your application, STOP here and changeIR220L+/IR220L/IR200L to USB-IR Dongle.Following are the instructions to properly install the ACT-IR220L+/220L/200L Dongle. You need acomputer system with at least one serial port and Windows 2000 already installed. The best choice for thesystem is a desktop.1. Connect ACT-IR220L+/200L serial adapter to the COM Port of Desktop PC.2. Startup your computer system3. Click on Control Panel.4. Double Click Add/Remove Hardware.5. On Welcome to the Add/Remove Hardwarewizard, click Next>.6. Choose Add/Troubleshoot a device, thenclick Next>. You may have to wait a while whenthe wizard searches for Plug and Playhardware.