ACTiSYS IR210L User Manual

Also see for ACT-IR210L: User manual User manual

Contents

ACTiSYS IR210L User Manual Manual pdf 5 page image

The Wireless Connectivity ExpertACT-IR210LUser’s Manual© Copyright 2003-2008 ACTiSYS Corp. Page 5 of 15 Apr. 21, 2008Ver. 1.5.1.11. INTRODUCTIONThis document provides instructions to install the ACT IR210L IR Dongle along with Windows98/ME/2000/XP device driver. It is assumed that the user is familiar with the basic operation ofWindow 98/ME/2000/XP.2. PARTS CHECK LISTWhen you unpack the package, the following items should be found.1. ACT-IR210L Adapter2. 5 pins Motherboard Connector3. User’s Guide4. 5 pins to 6 pins changer3. SYSTEM REQUIREMENTSTo use ACT-IR210L, your computer MUST meet the following requirements.1. Window 98/ME/2000/XP.2. Built in infrared I/O controller or super I/O chip on the motherboard with infrared connectoravailable and documented in the user’s manual.4. BIOS SETUPYou MUST setup BIOS FIRST. It assumed that your IR Dongle would be installed to serial Comport 2 before install the device driver.1. Choose PNP & PCI fromBIOS SETUPPNP OS Installed: NOResource Controlled by: Manual2. Choose Integrated Peripherals from BIOS SETUPOnboard UART2 Serial Port 2 : 2F8H/IRQ3Onboard IR function: SIR, HPSIR or IrDA or 3/16 baudRXD,TXD Active: Hi,LoIR Transmission delay: DisableIR FUNCTION DUPLEX: HALFIR Use Pins: IR-RX2,TX2