ACV BNE 1 Installation, Operating And Maintenance Instructions

Also see for BNE 1: Installation, operating and maintenance instructions

Contents

5TECHNICAL CHARACTERISTICSGENERALThe appliances are supplied fully assembled, tested and packedstanding on a timber transport base with impact protection strips andwrapped in heat-shrunk plastic film. When the appliance arrives,remove the packaging and check that no parts have been damagedin transit.Refer to the dimensions and weights listed below for handlingpurposes:DIMENSIONSOPERATING CONDITION LIMITSMaximum service pressure (tank filled with water)- Heating circuit: 3 bar- Hot water circuit: 10 barTest pressure (tank filled with water)- Heating circuit: 4.5 bar- Hot water circuit: 13 barOperating temperature- Maximum temperature: 90°CAJØ DGBLCKFHIHOT WATER OUTPUT DATA BNE 1 BNE 2 BNE 3• Operating conditions at 80°CPeak flow at 40°C (∆T = 30°C) l/10 min. 311 311 311Constant flow at 40°C (∆T = 30°C) l/h 716.4 898.8 898.8GENERAL CHARACTERISTICS BNE 1 BNE 2 BNE 3Input kW 22/28 30/41 40/57Output kW 20/25 28/36 36.5/51Loss of head mbar 20.0 25.5 30.0Flue gas pressure loss mbar 0.15 0.17 0.15Total capacity l 184 186 248Heating circuit capacity l 64 66 128Hot water connection (male) Ø 3/4” 3/4” 3/4”Heating connection (female) Ø 1” 1” 1” 1/4Boiler heating surface m2 1.1 1.1 1.1A mm B mm C mm D Ø mm F mm G mm H mm I mm J mm K mm L mm Kg (*)BNE 1 590 1505 640 130 463 260 615 1390 270 300 700 204BNE 2 590 1570 640 130 526 260 615 1450 270 300 700 222BNE 3 690 1610 740 150 564 260 715 1475 270 350 800 283(*) The weights shown are drained weights.