ACV Kompakt HRE eco 12 Solo Installation Instructions Manual

ACV Kompakt HRE eco 12 Solo Installation Instructions Manual Manual pdf 14 page image

ACV International 145.3 Electrical connectionCAUTIONAn earthed wall socket must be located no more than 1 metrefrom the appliance.The wall socket must be easily accessible.For installation in damp rooms a fixed connection isobligatory.When workin on the ectrical circuit always remove the plugfrom the wall socketIf the mains lead has to be replaced, this should be carried outby the manufacturer1. Slide the cover plate (A) (if present) to the front to remove.2. Unscrew screw (A) to gain access to the burner manager (B).3. Pull the burner manager unit forwards; the burner manager will tip downwardsto provide access.4. Consult sections 5.3.1 and 10.2 for the making the connections.5. After making the desired connections plug the appliance into an earthed wallsocket.5.3.1 Electrical connectionsTemperature control Connector X4 NotesRoom thermostat 6 - 7 On/OffModulating thermostat withcomfort function in use11 - 12 6 – 7 openOutside temperature sensor 8 - 9 -External DHW disable- orMIT switch9 - 10 Boiler NTC or thermostat.Note: Remove link 9-10.Frost protection thermostat 6 - 7 Parallel to roomthermostat