Computer system (via CAM)Each.computer.system.is.connected.to.the.AdderView.CATx.unit.via.a.Computer.Access.Module.(CAM).and.standard.category.5,.5e.or.6.cabling..CAMs.are.available.in.various.formats.to.suit.differing.computer.system.types.and.their.particular.connector.styles.To connect a computer system1. Ensure.that.power.is.disconnected.from.the.AdderView.CATx.unit.and.the.system.to.be.connected..(Note: If it is not possible to switch off devices prior to connection, thena ‘Hot plug’ procedure is available – see the Hot plugging and mouserestoration section for more details).2. Locate.the.required.CAM.(there.are.five.types.available).and.attach.its.video,.keyboard.and.mouse.(PS/2-style,.USB.or.Sun).and.optional.audio.connectors.to.the.relevant.sockets.on.the.computer.system..3. Lay.a.suitable.length.of.category.5,.5e.or.6.cabling.between.the.computer.system.and.the.AdderView.CATx.unit..The.maximum.length.of.the.cable.can.be.up.to.50.metres.(160.feet),.however,.bear.in.mind.that.the.overall.distance.between.any.remote.user.and.any.computer.must.not.exceed.300.metres.(980.feet).4. Attach.the.connector.of.the.cable.run.to.the.socket.of.the.CAM.5. At.the.other.end.of.the.cable.run,.attach.the.cable.connector.to.one.of.the.sockets.labelled.COMPUTER CONNECTIONS.on.the.rear.panel.of.the.AdderView.CATx.unit...VideoPS/2-style mousePS/2-style keyboardAudioUSB keyboard/mouseSun keyboard/mouseA range of differentconnector combinationsare made availableacross the five CAMformatsComputerAccessModuleCategory , e or cable from CAMCategory , e or cableto AdderView CATxAdderView CATxrear panelGreen indicator - power presentYellow indicator - signal activityNote: CAMs derive power from thecomputer system via either the PS/2-stylekeyboard connector, USB or SUN connector.6. Where.necessary.use.the.in-built.video.compensation.feature.of.the.AdderView.CATx.unit.to.eliminate.any.effects.caused.by.the.cable.run..See.Computer video compensation.for.details....Note: Each CAM isspecifically shaped sothat it can be securedusing a cable tie aroundits middle. In this way,two CAMs can also beneatly joined together,back-to-back..
