ADIC DAT 160 Installation And Operating Manual

Contents

ADIC DAT 160 Installation And Operating Manual Manual pdf 39 page image

Operation and Maintenance 27p Remove the magazine by using two hands to grasp the magazine and pull up andtoward you.p Store the magazine in a cool dry place.If you are using random access modeWhen operated in random access mode, the software usually commands the DATAutochanger to unload a magazine (or individual cassette). The LOCKED LED isintended to protect the system against unauthorized user intervention. When theLOCKED LED is on, the DAT Autochanger ignores the LOAD and UNLOADbuttons on the front panel. Use your system software to issue the UNLOADcommand.Removing the Magazine with a Cassette inDriveIf you wish to remove the magazine but there is a cassette in the drive, do thefollowing:p Cycle power on the DAT Autochanger (turn the power switch off and then backon after a few seconds have passed).p Open the DAT Autochanger door.p Press the eject button on the drive.p It will take thirty seconds or more for the drive to eject the cassette.p Close the door of the DAT Autochanger. Press the UNLOAD button to retrievethe cassette and move the magazine to the unloaded position.p Place the cover on the magazine and remove it as noted previously.Loading an Individual CassetteIf for some reason you need to use a single cassette, you can load it manually (thisoperation is the same as loading a cleaning cassette).