ADIC FastStor FastStor Mass Storage Device Installation And Operating Manual

Contents

ADIC FastStor FastStor Mass Storage Device Installation And Operating Manual Manual pdf 4 page image

ivRegulatory NoticesFCC Notices (USA Only)This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with themanufacturer’s instruction manual, may cause interference with radio and television reception. This equipment has been tested andfound to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmful interference with radio or televisionreception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference byone or more of the following measures:Reorient the receiving antenna.Relocate the equipment with respect to the receiver.Move the equipment away from the receiver.Plug the equipment into a different outlet so that the equipment and the receiver are on different branch circuits.If necessary, consult a representative of ADIC or an experienced radio/television technician for additional suggestions. You mayfind the following booklet helpful: FCC Interference Handbook, 1996, available from the U.S. Government Printing Office,Washington, DC 20402, Stock No. 004-000-00450-7.This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:This device may not cause harmful interference.This device must accept any interference received, including interference that may cause undesired operation.A Notice About Shielded Cables: Use only shielded cables for connecting peripherals to this device to reduce thepossibility of interference with radio and television reception. Using shielded cables ensures that you maintain theappropriate FCC radio frequency emissions compliance (for a Class A device) or FCC certification (for a Class Bdevice) of this product.The following information is provided on the device or devices covered in this document in compliance with FCC regulations:Product Name: DLT AutoloaderModel number: FS-DLT AutoloaderCompany name: Advanced Digital Information CorporationPO Box 97057Redmond, WA 98073-9757 USA(425) 881-8004IC Notice (Canada Only)Most tape libraries are classified by the Industry Canada (IC) Interference-Causing Equipment Standard #3 (ICES-003) as Class Bdigital devices. To determine which classification (Class A or B) applies to your tape library, examine all registration labels locatedon the bottom or the back panel of your library. A statement in the form of “IC Class A ICES-3” or “IC Class B ICES-3” will belocated on one of these labels.Note that Industry Canada regulations provide that changes or modifications not expressly approved by the tape librarymanufacturer could void your authority to operate this equipment.This Class B (or Class A, if so indicated on the registration label) digital apparatus meets the requirements of the CanadianInterference-Causing Equipment Regulations.Cet appareil numérique de la Classe B (ou Classe A, si ainsi indiqué sur l’étiquette d’enregistration) respecte toutes lesexigences du Reglement sur le Materiel Brouilleur du Canada.