ADInstruments MA3300 Owner's Manual
Also see for MA3300: Owner's guide
                                                                                                        | |
Contents
| 
Operator’s Manual 1001 iGENERAL HANDLING PRECAUTIONSThis device is intended for use only by qualified medical personnel.Use only our approved products with this device. Use of non-approved products or in a non-approved manner may affect the performance specifications of the device. This includes, but isnot limited to, batteries, recording paper, pens, extension cables, electrode leads, input boxesand AC power.Please read these precautions thoroughly before attempting to operate the instrument.1. To safely and effectively use the instrument, its operation must be fully understood.2. When installing or storing the instrument, take the following precautions:(1) Avoid moisture or contact with water, extreme atmospheric pressure, excessive humidity and temperatures, poorlyventilated areas, and saline or sulphuric air.(2) Place the instrument on an even, level floor. Avoid vibration and mechanical shock, even during transport.(3) Avoid placing in an area where chemicals are stored or where there is danger of gas leakage.(4) The power line source to be applied to the instrument must correspond in frequency and voltage to productspecifications, and have sufficient current capacity.(5) Choose a room where a proper grounding facility is available.3. Before Operation(1) Check that the instrument is in perfect operating order.(2) Check that the instrument is grounded properly.(3) Check that all cords are connected properly.(4) Pay extra attention when the instrument is combined with other instruments to avoid misdiagnosis or other problems.4. During Operation(1) The instrument must receive continual, careful attention.(2) Turn power off or remove electrodes and/or transducers when necessary to assure the safety.5. To Shutdown After Use(1) Turn power off with all controls returned to their original positions.(2) Remove the cords gently; do not use force to remove them.(3) Remove the power cord from the AC SOURCE socket to isolate the instrument from the AC supply mains.(4) Clean the instrument together with all accessories for their next use.6. The instrument must receive expert, professional attention for maintenance and repairs. When the instrument isnot functioning properly, it should be clearly marked to avoid operation while it is out of order.7. The instrument must not be altered or modified in any way.8. Maintenance and Inspection:(1) The instrument and parts must undergo regular maintenance inspection at least every 6 months.(2) If stored for extended periods without being used, make sure prior to operation that the instrument is in perfectoperating condition.(3) Technical information such as parts list, descriptions, calibration instructions or other information is available forqualified user technical personnel upon request from your distributor. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine