12/09User InstructionsAmerican DJ® - www.americandj.com - Comscan LED Instruction Manual Page 2Comscan LED General InformationUnpacking: Thank you for purchasing the Comscan LED by Ameri-can DJ®. Every Comscan LED has been thoroughly tested and hasbeen shipped in perfect operating condition. Carefully check the ship-ping carton for damage that may have occurred during shipping. If thecarton appears to be damaged, carefully inspect your fixture for anydamage and be sure all equipment necessary to operate the unit hasarrived intact. In the event damage has been found or parts are miss-ing, please contact our toll free customer support number for furtherinstructions. Please do not return this unit to your dealer without con-tacting customer support first.Introduction: The Comscan LED is a five channel DMX intelligent,LED scanner. The Comscan LED can operate as a stand alone fixtureor in a Master/Slave configuration. The Comscan LED has three oper-ating modes; sound active mode, show mode and DMX control. Forbest results use fog or special effects smoke to enhance the beamsprojections.Customer Support: American DJ® provides a toll free customersupport line, to provide help and to answer any question should youencounter problems during your set up or initial operation. You mayalso visit us on the web at www.americandj.com for any comments orsuggestions. Service Hours are Monday through Friday 9:00 a.m. to4:30 p.m. Pacific Standard Time.Voice: (800) 322-6337Fax: (323) 582-2941E-mail: support@americandj.comTo purchase parts online visit http://parts.americandj.comWarning! To prevent or reduce the risk of electrical shock or fire, donot expose this unit to rain or moisture.Warning! This may cause severe eye damage. Avoid looking directlyinto the light source at all times!