ADJ X-SCAN LED PLUS User Instructions

American DJ ®6122 S. Eastern Ave.Los Angeles CA. 90040www.americandj.comRev. 8/08User InstructionsAmerican DJ ® - www.americandj.com - X-Scan LED™ Instruction Manual Page 2X-Scan LED™ General InformationX-SCAN LED PLUSUnpacking: Thank you for purchasing the X-Scan LED™ byAmerican DJ®. Every X-Scan LED™ has been thoroughly tested andhas been shipped in perfect operating condition. Carefully checkthe shipping carton for damage that may have occurred duringshipping. If the carton appears to be damaged, carefully inspectyour fixture for any damage and be sure all equipment necessary tooperate the unit has arrived intact. In the event damage has beenfound or parts are missing, please contact our toll free customersupport number for further instructions. Please do not return thisunit to your dealer without contacting customer support first.Introduction: The X-Scan LED™ is a eight channel DMX intelligent,LED scanner. The X-Scan LED™ can operate as a stand alone fixtureor in a Master/Slave configuration. The X-Scan LED™ has two opera-ting modes; sound active mode and DMX control. For best resultsuse fog or special effects smoke to enhance the beams projections.Customer Support: American DJ® provides a toll free customersupport line, to provide help and to answer any question shouldyou encounter problems during your set up or initial operation. Youmay also visit us on the web at www.americandj.com for any com-ments or suggestions. Service Hours are Monday through Friday9:00 a.m. to 5:00 p.m. Pacific Standard Time.Voice: (800) 322-6337Fax: (323) 582-2941E-mail: support@americandj.comTo purchase parts online visit http://parts.americandj.comWarning! To prevent or reduce the risk of electrical shock or fire, donot expose this unit to rain or moisture.Warning! This may cause severe