ADJ ENCORE BURST 100IP User Manual

19OPERATING INSTRUCTIONSP-On Time-R - With this function you are able to check the number of hours that the fixture has beenpowered on since the last reset. Please note: This time value can be reset, so it may not be the sameas the total power ON running time displayed under “POWER ON TIME”.1. Press either the MENU, UP, or DOWN buttons until “Information” is displayed, then press ENTER.2. Press the UP or DOWN buttons until “Fixture Life Time” is displayed, then press ENTER.3. Press the UP or DOWN buttons until “P-On Time-R” is displayed, then press ENTER.4. The power ON running time of the fixture will now be displayed. Press the MENU button to exit.P-On Time Reset - With this function you can reset the current power ON running time that is dis-played under “P-ON TIME-R”.1. Press the either the MENU, UP, or DOWN buttons until “Information” is displayed, then pressENTER.2. Press the UP or DOWN buttons until “Fixture Life Time” is displayed, then press ENTER.3. Press the UP or DOWN buttons until “P-On Time Reset” is displayed, then press ENTER.4. Use the UP or DOWN buttons to set the pass code to “050” and press ENTER. The P-ON TIME-Rwill now be reset to “0”.LED On Time - With this function you are able to check the total number of hours that the LED hasbeen powered on during the fixture’s lifetime. This total LED On time can NOT be reset.1. Press either the MENU, UP, or DOWN buttons until “Information” is displayed, then press ENTER.2. Press the UP or DOWN buttons until “Total LED Time” is displayed, then press ENTER.3. Press the UP or DOWN buttons until “LED On Time” is displayed, then press ENTER.4. The total power ON running time of the fixture will now be displayed. Press the MENU button toexit.LED On Time-R - With this function you are able to check the number of hours that the LED hasbeen powered on since the last reset. Please note: This time value can be reset, so it may not be thesame as the total LED ON time displayed under “LED ON TIME.”1. Press either the MENU, UP, or DOWN buttons until “Information” is displayed, then press ENTER.2. Press the UP or DOWN buttons until “Total LED Time” is displayed, then press ENTER.3. Press the UP or DOWN buttons until “LED On Time-R” is displayed, then press ENTER.4. The power ON running time of the fixture will now be displayed. Press the MENU button to exit.LED Time Reset - With this function you can reset the current LED ON time that is displayed under“LED ON TIME-R”.1. Press either the MENU, UP, or DOWN buttons until “Information” is displayed, then press ENTER.2. Press the UP or DOWN buttons until “Total LED Time” is displayed, then press ENTER.3. Press the UP or DOWN buttons until “LED Time Reset” is displayed, then press ENTER.4. Use the UP or DOWN buttons to set the pass code to “050” and press ENTER. The LED ONTIME-R will now be reset to “0”.Current - With this function you can check the current temperature of the fixture.1. Press either the MENU, UP, or DOWN buttons until “Information” is displayed, then press ENTER.2. Press the UP or DOWN buttons until “Fixture Temps” is displayed, then press ENTER.3. Press the UP or DOWN buttons until “Current” is displayed, then press ENTER.4. The fixture’s current temperature will now be displayed. Press the UP or DOWN buttons to switchbetween Fahrenheit and Celsius. Press the MENU button to exit.