ADJ ENCORE LBI5IP User Manual

14Proxied Device Count Device Power CyclesSensor Definition Pan InvertSensor Value Tilt InvertDevice Model Description Pan Tilt SwapManufacturer Label Display InvertDevice Lavel Display LevelDMX Personality Realtime ClockDMX Personality Description Power StateDevice Hours Preset PlaybackComms Status Default Slot ValueStatus ID Description LanguageClear Status ID Language CapabilitiesLamp Hours Boot Software Version LabelLamp Strikes Boot Software Version IDLamp State Product Detail ID ListLamp Mode Status MessagesR E M O T E D E V I C E M A N A G E M E N T ( R D M )NOTE: In order for RDM to work properly, RDM enabled equipment must be used throughoutthe entire system, including DMX data splitters and wireless systems.Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data standardfor lighting, allowing the DMX systems of the fixtures to be modified and monitored remotely. Thisprotocol is ideal for instances in which a unit is installed in a location that is not easily accessible.With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM enabledcontroller to send out a signal to devices on the wire, as well as allowing the fixture to respond(known as a GET command). The controller can then use its SET command to modify settings thatwould typically have to be changed or viewed directly via the unit’s display screen, including the DMXAddress, DMX Channel Mode, and Temperature Sensors.Please be aware that not all RDM devices support all RDM features, and therefore it is importantto check beforehand to ensure that the equipment that you are considering includes all of the featuresthat you require.The following parameters are accessible in RDM on this device: