ADJ FL1300 User Manual

Also see for ENCORE BURST 200: User manual

19S Y S T E M M E N UAddr: DMX-512 Address Setting.Select “Addr,” then press the ENTER button. When the display begins to blink, use the DOWN andUP buttons to change the DMX-512 address (001-512). Once the address has been selected, pressthe ENTER button to confirm, or press the MENU button to exit without making any change. Thesystem will return to the main menu after 8 seconds of inactivity.ChNd: Channel Mode.Select “ChNd,” then press the ENTER button. Use the DOWN and UP buttons to select the channelmode from the following options:• 1-Channel Mode• 2-Channel Mode• 2A-Channel Mode• 3-Channel Mode• 4-Channel Mode• 6-Channel ModeOnce you have made your selection, press the ENTER button to confirm, or exit to the main menuwithout making any changes by pressing the MENU button. The system will return to the main menuafter 8 seconds of inactivity.dINd: Dimmer Curve.Select “dINd,” then press the ENTER button. Use the DOWN and UP buttons to select from thefollowing dimmer curves:• Standard• Stage• TV• Architec• Theatre• Stage2Once you have made you selection, press the ENTER button to confirm, or press the MENU buttonto exit without making any changes. The system will return to the main menu after 8 seconds ofinactivity.Und: Tungsten Filament Effect.Select “Und,” then press the ENTER button. Use the DOWN and UP buttons to select “on” or “off.”Once you have made your selection, press the ENTER button to confirm, or press MENU to exitwithout making any changes.dNSt: DMX State.Select “dNSt,” then press the ENTER button. Use the DOWN and UP buttons to select from thefollowing options:• “bLNd”: Blackout• “HoLd”: Hold last state• “NAnd”: Manual modeOnce you have made your selection, press the ENTER button to confirm, or press MENU to exitwithout making any changes.