ADJ FOCUS SPOT THREE Z User Instructions

Also see for Focus Spot Three Z: User instructions

Contents

A.D.J. Supply Europe B.V. – www.americandj.eu – Focus Spot Three Z Instruction Manual Page 211. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that “Prism 1 Offset”is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press theMENU button for one second to exit.Prism 2 Offset - Setting adjustment for the 2nd prism.1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that “Prism 1 Offset”is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press theMENU button for one second to exit.Rprism Offset - Setting adjustment for the rotating prism.1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “Rprsim Offset”is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press theMENU button for one second to exit.Focus Offset - Setting adjustment for the focus.1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “Focus Offset”is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press theMENU button for one second to exit.Zoom Offset - Setting adjustment for the zoom.1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “Zoom Offset”is displayed, press ENTER.2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press theMENU button for one second to exit.OPERATIONUniversal DMX Control: This function allows you to use a universal DMX-512 controller to control the chasesand patterns, dimmer and strobe. A DMX controller allows you to create unique programs tailored to yourindividual needs.1. The Focus Spot Three Z has 2 DMX channel modes; 18 channel mode, and 21 channel mode. See pages10-15 for detailed description of the DMX values and traits.2. To control your fixture in DMX mode, follow the set-up procedures on pages 8-9 as well as the set-upspecifications that are included with your DMX controller.3. Use the controller’s faders to control the various DMX fixture traits.4. This will allow you to create your own programs.5. Follow the instructions on page 17 to select your desired DMX channel mode and to set the DMX address.6. For longer cable runs (more than a 100 feet) use a terminator on the last fixture.7. For help operating in DMX mode consult the manual included with your DMX controller.Sound Active Mode: This mode allows either single unit or several units linked together, to run to the beat ofthe music.1. Press the MENU button until “Sound State” is displayed, and press ENTER. Press the UP or DOWN buttonsso that “ON” is displayed and press ENTER.2. Press the MENU button until “Sound Sense” is displayed, and press ENTER. Use the UP and DOWN buttonsto adjust the sound sensitivity. Press ENTER when you have found your desired sensitivity level.Show Mode: This mode allows either a single unit or several units linked together, to run one of four shows thatyou choose.1. Press the MENU button until “Show Mode” is displayed, and press ENTER.2. Press the UP or DOWN buttons to find your desired show, and press ENTER.MASTER-SLAVE SET UP