ADJ Flat Par Tri18 User Instructions

Also see for Flat Par Tri18: Specifications

Contents

operating modes

©American DJ® - www.Americandj.com - Flat Par Tri18 User Manual Page 8Flat Par Tri18 Operating Instructions Flat Par Tri18 Operating Instructions©American DJ® - www.Americandj.com - Flat Par Tri18 User Manual Page 7LED Display On/Off:To set the LED display to turn off after 10 seconds, press the MODE but-ton until “don” is displayed, press the UP button to display “doff”. Nowthe display will disappear after 10s. Press any button to turn the displayon again. Be advised though that the display will turn off automaticallyafter 10 seconds.To set the display press the MODE button until “dXX” is displayed. Usethe UP or DOWN buttons to select either:“don” = LED display on at all times.“doFF” = LED display shuts off after 10 seconds.LED Display Inversion:Follow these instructions to flip the display 180° so that the display canbe read upside down.1. Plug the fixture in and press the MODE button until “dXX” is dis-played. “XX” represents either “on” or “oFF”.2. Press the SET UP button until “Stnd” is displayed.3. Press the UP or DOWN buttons to reverse the display 180°.Operating Modes:The Flat Par Tri18 has five operating modes:• Sound-Active mode - The unit will react to sound, chasing through thebuilt in programs.• Static Color Mode - There are 7 colors to choose from.• Auto Mode - There are 3 Auto Modes to choose from.• RGB Mode - Choose one of the three colors to remain static oradjust the intensity of each color to make your desired color.• DMX control mode - This function will allow you to control eachindividual fixtures traits with a standard DMX 512 controller such asas the American DJ® Show Designer™.Sound Active Mode:In this mode the Flat Par Tri18 will react to sound, and chase through thedifferent colors.1. Plug the fixture in and press the MODE button until “So-X” is dis-played. “X” represents the sound active mode (1-8) currently dis-played.2. The fixture will now change via sound.3. Press the SET UP button to adjust the sound sensitivity. “SJ-X”should be displayed. Use the UP or DOWN buttons to adjust the sen-sitivity. “SJ-1” is the lowest sensitivity, “SJ-8” is the highest.Static Color Mode:1. Plug the fixture in and press the MODE button until “CL-X” is dis-played.2. There are 7 colors to choose from. Select your desired color bypressing the UP and DOWN buttons. After you have selected yourdesired color you can activate strobing by pressing the SET UP but-ton to enter the Flash (strobe) mode.3. “FS.XX” will be displayed, this is Flash mode. The Flash can beadjusted between “FS.00” (flash off) to “FS.15” (fastest flash).Auto Mode: There are 3 types of Auto Modes to choose from; ColorFade, Color Change, and both modes running together. The runningspeed is adjustable in all 3 modes.1. Plug the fixture in and press the MODE button until either “AF-X”,“AJ-X”, or “A-JF” is displayed.• AF-X = Color Fade mode, there are 8 Color Fade modes to choosefrom. Use the UP or DOWN buttons to scroll through the differentAuto Fade modes.• AJ-X = Color Change mode, there are 8 Color Change modes tochoose from. Use the UP or DOWN buttons to scroll through thedifferent Auto Change modes.• A-JF = Both Color Fade and Color Change modes running.2. After you have chosen your desired running mode press the SET UPbutton until “SP.XX” is displayed. When this is displayed you canadjust the running speed of your desired program. Use the UP orDOWN button to adjust the speed between “SP.01” (slowest) and“SP.16” (fastest). Once you have set your desired running speed,press the SET UP button to return to your desired Auto Mode.RGB Dimmer Mode:1. Plug the fixture in and press the MODE button until:2. When “r.XXX” is displayed you are in Red dimming mode. Press theUP and DOWN buttons to adjust intensity.3. When “G.XXX” is displayed you are in Green dimming mode. Pressthe UP and DOWN buttons to adjust intensity.4. When “b.XXX” is displayed you are in Blue dimming mode. Press theUP and DOWN buttons to adjust intensity.5. After you have adjusted the RGB colors to make your desired color