ADJ MEGA 64 HEX PAK User Instructions

Contents

operating modes

ADJ Products, LLC - www.adj.com - Mega 64 HEX Pak User Manual Page 8Mega 64 HEX Pak Operating Instructions2. To run your fixture in DMX mode press the MODE button until“d.XXX” is displayed. “XXX” represents the current displayed ad-dress. Use the UP or DOWN buttons to select your desired DMXaddress, then press the SETUP button to select your DMXChannel mode.3. Use the UP or DOWN buttons to scroll through the DMX Channelmodes. The Channel modes are listed below:• To run the 6 Channel Mode, press the MODE button until “Ch06”is displayed. This is the 6 Channel DMX Mode.• To run the 7 Channel Mode, press the MODE button until “Ch07”is displayed. This is the 7 Channel DMX Mode.• To run the 8 Channel Mode, press the MODE button until “Ch08”is displayed. This is the 8 Channel DMX Mode.• To run the 11 Channel Mode, press the MODE button until “Ch11”is displayed. This is the 11 Channel DMX Mode.• To run the 12 Channel Mode, press the MODE button until “Ch12”is displayed. This is the 12 Channel DMX Mode.4. Please see pages 15-22 for DMX values and traits.5. After you have chosen your desired DMX Channel mode plug inthe fixture via the XLR connections to any standard DMX control-ler.RGBWA + UV Dimmer Mode:1. Plug the fixture in and press the MODE button until:2. When “r.XXX” is displayed you are in Red dimming mode. Pressthe UP and DOWN buttons to adjust intensity. After you havefinished adjusting the intensity, or you would like to skip to thenext color, press the SET UP button.3. When “G.XXX” is displayed you are in Green dimming mode.Press the UP and DOWN buttons to adjust intensity.4. When “b.XXX” is displayed you are in Blue dimming mode. Pressthe UP and DOWN buttons to adjust intensity.5. When “U.XXX” is displayed you are in White dimming mode. Pressthe UP and DOWN buttons to adjust intensity.6. When “A.XXX” is displayed you are in Amber dimming mode.Press the UP and DOWN buttons to adjust intensity.7. When “u.XXX” is displayed you are in UV dimming mode. Pressthe UP and DOWN buttons to adjust intensity.ADJ Products, LLC - www.adj.com - Mega 64 HEX Pak User Manual Page 9Mega 64 HEX Pak Operating Instructions8. After you have adjusted the RGBWA + UV colors to make yourdesired color you can then activate strobing by pressing the SETUP button to enter the Flash (strobe) mode.9. “FS.XX” will be displayed, this is Flash mode. The Flash can beadjusted between “FS.00” (flash off) to “FS.15” (fastest flash).Sound Active Mode:In this mode the Mega 64 HEX will react to sound, and chase throughthe different colors.1. Plug the fixture in and press the MODE button until “SoXX” isdisplayed. “XX” represents the sound active mode (1-16) currentlydisplayed. Use the UP and DOWN buttons to scroll through thsound active modes.2. After you have found your desired sound active mode, press theSET UP button to adjust the sound sensitivity. “SJ-X” will be dis-played. Use the UP and DOWN buttons to adjust the sensitivity.“SJ-1” is the lowest sensitivity, “SJ-8” is the highest.Auto Run Mode:There are 3 types of Auto Run Modes to choose from; Color Fade,Color Change, and both modes running together. The running speedis adjustable in all 3 modes.1. Plug the fixture in and press the MODE button until either“AFXX”, “AJXX”, or “A-JF” is displayed. Press the SET UP Buttonto change between the 3 Auto Run modes• AFXX = Color Fade mode, there are 16 Color Fade modes tochoose from. Use the UP or DOWN buttons to scroll through thedifferent Auto Fade modes.• AJXX = Color Change mode, there are 16 Color Change modes tochoose from. Use the UP or DOWN buttons to scroll through thedifferent Auto Change modes.• A-JF = Both Color Fade and Color Change modes running.2. After you have chosen your desired running mode press the SETUP button until “SP.XX” is displayed. When this is displayed youcan adjust the running speed of your desired program. Use theUP or DOWN button to adust the speed between “SP.01” (slow-est) and “SP.16” (fastest). Once you have set your desired runningspeed, press the SET UP button to return to your desired AutoRun Mode.