ADJ MOD TWIOO User Instructions

ADJ MOD TWIOO User Instructions Manual pdf 16 page image

A.D.J. Supply Europe B.V. – www.americandj.eu – MOD TW100 Instruction Manual Page 16OPERATING INSTRUCTIONSThe control panel will lock up after 5 seconds of inactivity. Press the MODE button for at least 5seconds to unlock the control panel.LCD Backlight On/Off:To set the LCD backlight to turn off after 20 seconds, press the MODE button until “OPTION BLGT: XX” isdisplayed. “XX” represents the current state. Press the UP or DOWN buttons to set the backlight to turn “OFF”after 20 seconds or “ON” to stay on at all times.Operating Modes:The MOD TW100 has seven operating modes:• CW/WW/Amber Dimmer Mode - Choose one of the three colors to remain static or adjust the intensity ofeach color to make your desired color.• Color Change mode - There are 8 color change modes to choose from. In color change mode the unit willchange through the various colors depending on the color change mode that is chosen. The color changerunning speed is adjustable.• Color Fade mode - There are 8 color fade modes to choose from. In color fade mode the unit will fadethrough the various colors depending on the color fade mode that is chosen. The fade running speed isadjustable.• Auto Run Mode - In Auto Run Mode, the fixture will run a combination of color change and color fade. Therunning speed is adjustable.• Sound Active mode - The unit will react to sound, chasing through the built in programs. There are 8 soundactive modes.• Static Color Mode - There are 32 colors to choose from.• DMX control mode - This function will allow you to control each individual fixtures traits with a standard DMX512 controller.DMX Mode:Operating through a DMX controller gives the user the freedom to create their own programs tailored to theirown individual needs. The MOD TW100 has 5 DMX modes: 3 channel mode, 4 channel mode, 5 channelmode, 8 channel mode, and 9 channel mode. See pages 10-13 for each modes DMX traits.1. This function will allow you to control each individual fixture’s traits with a standard DMX 512 controller.2. To run your fixture in DMX mode press the MODE button until “DMX MODE: XXX” is displayed. “XXX”represents the current displayed DMX address. Use the UP or DOWN buttons to select your desired DMXaddress, then press the SETUP button to select your DMX channel mode.3. Use the UP or DOWN buttons to scroll through the DMX channel modes. The channel modes are listedbelow:• “CHAN: 03” is 3 Channel DMX Mode.• “CHAN: 04” is 4 Channel DMX Mode.• “CHAN: 05” is 5 Channel DMX Mode.• “CHAN: 08” is 8 Channel DMX Mode.• “CHAN: 09” is 9 Channel DMX Mode.4. Please see pages 10-13 for DMX values and traits.5. After you have chosen your desired DMX Channel mode plug in the fixture via the XLR connections to anystandard DMX controller.