ADJ Startec RAYZER User Instructions

Contents

ADJ Startec RAYZER User Instructions Manual pdf 14 page image

ADJ Products, LLC - www.adj.com - Rayzer User Manual Page 13Rayzer Operating InstructionsSystem Menu: When making adjustments press ENTER to confirm your setup then press andhold the MENU button for at least 3 seconds. To exit without making any adjustments pressthe MENU button. The display will lock after 30 seconds, press the MENU button for 3 sec-onds to unlock.ADDR - DMX Address Setting.1. Press the either the MENU, UP, or DOWN buttons until “ADDR” is displayed, press ENTER.2. The current address will now be displayed and flashing. Press the UP or DOWN buttons to findyour desired address. Press ENTER to set your desired DMX address.CHND - This will let select your desired DMX channel mode.1. Press the either the MENU button until “CHND” is displayed, press ENTER. The current channelmode will now be displayed.2. Press the UP or DOWN buttons to find your desired DMX channel mode and press ENTER toconfim and exit.SHND - Show modes 0-4 (Factory programs). Show mode can run with or without soundactive mode active.1. Press the MENU button until “SHND” is displayed, press ENTER.2. “Sh X” will now be displayed, “X” representing a number between 0-4. Shows 1-4 are factory pro-grams, while show “0” is random mode. Use the UP or DOWN buttons to find your desired show.3. When you have found your desired show press ENTER, then press and hold the MENU button forat least 3 seconds to activate. After you have set your desired show, it can be changed at any timeusing the UP or DOWN buttons.SLND - This will let you set unit as a master or slave in a master/slave configuration.1. Press the MENU button until “SLND” is displayed, press ENTER. Either “MAST”, “SL 1”, or “SL 2”will be displayed.2. Press the UP or DOWN buttons until your desired setting is displayed, press ENTER to confim.SOUN - Sound Active mode.1. Press the MENU button until “SOUN” is displayed, press ENTER.2. The display will show either “ON” or “OFF”. Press the UP or DOWN buttons to select “ON” toactivate sound active mode, or “OFF” to deactivate sound active mode.3. Press ENTER to confirm.SENS - In this mode you can adjust the sound sensitivity.1. Press the MENU button until “SENS” is displayed, press ENTER.2. A number between 0-100 will be displayed. Press the UP or DOWN buttons to adjust the soundsensitivity. 0 being the least sensitive, and 100 being the most sensitive.3. When you have found your desired setting press ENTER to confirm.